Liberty Ostrava
Liberty Ostrava is a production or processing of ferrous metals installation in Czechia. It last reported verified emissions for 2024: 8,968 tonnes.
Key figures
Country
Installation ID
CZ 410
Verified emissions, 2024
8,968 tCO₂e
Free allocation, 2024
27,455 allowances
Allowance position, 2024
Not available
Compliance, 2024
B
Permit
CZ-0435-07
Data as of
1 April 2026
Emissions and free allocation by year
| Year | Verified emissions (t) | Free allocation | Position |
|---|---|---|---|
| 2025 | none | 16,251 | |
| 2024 | 8,968 | 27,455 | 18,487 surplus |
| 2023 | 41,000 | 30,130 | 10,870 short |
| 2022 | 48,605 | 34,152 | 14,453 short |
| 2021 | 54,653 | 28,027 | 26,626 short |
| 2020 | 50,958 | 6,188 | 44,770 short |
| 2019 | 48,194 | 6,318 | 41,876 short |
| 2018 | 57,724 | 6,448 | 51,276 short |
| 2017 | 60,181 | 6,576 | 53,605 short |
| 2016 | 54,439 | 6,703 | 47,736 short |
| 2015 | 63,701 | 6,829 | 56,872 short |
| 2014 | 74,777 | 6,953 | 67,824 short |
| 2013 | 72,696 | 7,076 | 65,620 short |
Verified emissions changed by -87.7% from 2013 to 2024.
Source: European Commission, Union Registry · Data as of 1 April 2026
Allowance position
No verified emissions were reported for 2025, so there is no position for the latest year.
Compliance status for 2024: B. The number of allowances surrendered by 30 September 2025 was lower than verified emissions.
CBAM context
This activity falls in the iron and steel sector of the Carbon Border Adjustment Mechanism. Free allocation for products covered by the Carbon Border Adjustment Mechanism is being reduced each year under current EU law.
| 2026 | 2027 | 2028 | 2029 | 2030 | 2031 | 2032 | 2033 | 2034 |
|---|---|---|---|---|---|---|---|---|
| 97.5% | 95% | 90% | 77.5% | 51.5% | 39% | 26.5% | 14% | 0% |
Share of free allocation remaining for CBAM-covered products, under Directive (EU) 2023/959, Article 10a. It applies to the benchmarks for those products, not necessarily to an installation's whole allocation, so it is not applied to the figures on this page.
Proposed change
A European Commission proposal of 17 July 2026 would restore 15% of the phased-out free allocation for CBAM sectors from 2028 and extend the end of the phase-out from 2034 to 2038. This is a proposal and not yet law.
More on CBAM: the India CBAM Center and what CBAM is and how it works.
Nearby installations
Production or processing of ferrous metals installations in Czechia, largest first.
- Válcovna kol, kovárna náprav BONATRANS GROUP a.s. 30,351 t in 2025
- Slévárny Třinec, a.s. 4,184 t in 2025
Questions about Liberty Ostrava
How much did Liberty Ostrava emit in 2024?
8,968 tonnes of verified emissions, per EU Union Registry compliance data.
How many free allowances did Liberty Ostrava receive?
27,455 in 2024.
Did Liberty Ostrava surrender enough allowances?
Its compliance status for 2024 is recorded as "B": The number of allowances surrendered by 30 September 2025 was lower than verified emissions.