Schmiede

Schmiede is a production or processing of ferrous metals installation in Germany. In 2025 it reported 29,672 tonnes of verified emissions against 28,411 free allowances.

Key figures

Country

Germany

Activity

Production or processing of ferrous metals

Installation ID

DE 203410

Verified emissions, 2025

29,672 tCO₂e

Free allocation, 2025

28,411 allowances

Allowance position, 2025

1,261 short

Compliance, 2024

A

Permit

14226-0041

Data as of

1 April 2026

Emissions and free allocation by year

Verified emissions Free allocation
Verified emissions and free allocation of SchmiedeVerified emissions and free allocation from 2013 to 2025.025k50k75k100k2013 verified emissions: 49,709 t2014 verified emissions: 47,588 t2015 verified emissions: 44,287 t2016 verified emissions: 52,173 t2017 verified emissions: 49,424 t2018 verified emissions: 47,158 t2019 verified emissions: 42,035 t2020 verified emissions: 36,785 t2021 verified emissions: 41,207 t2022 verified emissions: 40,258 t2023 verified emissions: 36,037 t2024 verified emissions: 34,412 t2025 verified emissions: 29,672 t2013 free allocation: 40,983 t2014 free allocation: 36,677 t2015 free allocation: 32,486 t2016 free allocation: 28,424 t2017 free allocation: 24,486 t2018 free allocation: 21,072 t2019 free allocation: 17,413 t2020 free allocation: 13,855 t2021 free allocation: 29,390 t2022 free allocation: 29,390 t2023 free allocation: 29,390 t2024 free allocation: 28,411 t2025 free allocation: 28,411 t2013201520172019202120232025
YearVerified emissions (t) Free allocationPosition
2025 29,672 28,411 1,261 short
2024 34,412 28,411 6,001 short
2023 36,037 29,390 6,647 short
2022 40,258 29,390 10,868 short
2021 41,207 29,390 11,817 short
2020 36,785 13,855 22,930 short
2019 42,035 17,413 24,622 short
2018 47,158 21,072 26,086 short
2017 49,424 24,486 24,938 short
2016 52,173 28,424 23,749 short
2015 44,287 32,486 11,801 short
2014 47,588 36,677 10,911 short
2013 49,709 40,983 8,726 short

Verified emissions changed by -40.3% from 2013 to 2025.

Source: European Commission, Union Registry · Data as of 1 April 2026

Allowance position

In 2025, verified emissions exceeded free allocation by 1,261 allowances, which the operator had to obtain.

Illustrative value at the latest reference price of €85.90 (28 September 2026): €108,320. Not the installation's actual cost, which depends on when and how it acquired allowances.

Price source: EU ETS primary auctions · latest price

Compliance status for 2024: A. The number of allowances surrendered by 30 September 2025 was greater than or equal to verified emissions.

CBAM context

This activity falls in the iron and steel sector of the Carbon Border Adjustment Mechanism. Free allocation for products covered by the Carbon Border Adjustment Mechanism is being reduced each year under current EU law.

Free allocation remaining for CBAM-covered products, by year
202620272028202920302031203220332034
97.5%95%90%77.5%51.5%39%26.5%14%0%

Share of free allocation remaining for CBAM-covered products, under Directive (EU) 2023/959, Article 10a. It applies to the benchmarks for those products, not necessarily to an installation's whole allocation, so it is not applied to the figures on this page.

Proposed change

A European Commission proposal of 17 July 2026 would restore 15% of the phased-out free allocation for CBAM sectors from 2028 and extend the end of the phase-out from 2034 to 2038. This is a proposal and not yet law.

More on CBAM: the India CBAM Center and what CBAM is and how it works.

Nearby installations

Production or processing of ferrous metals installations in Germany, largest first.

Questions about Schmiede

How much did Schmiede emit in 2025?

29,672 tonnes of verified emissions, per EU Union Registry compliance data.

How many free allowances did Schmiede receive?

28,411 in 2025.

Did Schmiede surrender enough allowances?

Its compliance status for 2024 is recorded as "A": The number of allowances surrendered by 30 September 2025 was greater than or equal to verified emissions.